دوره CCNA

  • نام مدرک : Cisco Certified Network Associate
  • مدت دوره : 40
  • پیش نیاز دوره : Network+
  • شهریه دوره صبح : 264000 تومان عصر: 460000 تومان

دوره CCNA توسط شرکت سیسکو ارائه می شود,شرکت سیسکو یکی از معتبر ترین شرکت های تولید کننده سخت افزار و تجهیزات تحت شبکه می باشد. در دوره CCNA افراد با پیکر بندی تجهیزات سخت افزاری تحت شبکه از قبیل سوئیچ, روترو وایرلس آشنا می شوند. افراد پس از گذراندن دوره CCNA توانائی پیکربندی شبکه های WAN, LAN را در ابعاد کوچک و متوسط پیدا خواهند کرد.

مدت دوره کد آزمون نام دوره
40 120-200 CCNA
CCNA (120-200) Syllabus:

Operation of IP Data Networks

  • Operation of IP Data Networks
  • Recognize the purpose and functions of various network devices such as Routers, Switches, Bridges and Hubs.
  • Select the components required to meet a given network specification.
  • Identify common applications and their impact on the network
  • Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models.
  • Predict the data flow between two hosts across a network.
  • Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN

LAN Switching Technologies

  • Determine the technology and media access control method for Ethernet networks
  • Identify basic switching concepts and the operation of Cisco switches.
    • Collision Domains
    • Broadcast Domains
    • Types of switching
    • CAM Table
  • Configure and verify initial switch configuration including remote access management.
    • Cisco IOS commands to perform basic switch setup
  • Verify network status and switch operation using basic utilities such as ping, telnet and ssh.
  • Identify enhanced switching technologies
    • RSTP
    • PVSTP
    • Ethercnannels
  • Describe how VLANs create logically separate networks and the need for routing between them.
    • Explain network segmentation and basic traffic management concepts
  • Configure and verify VLANs
  • Configure and verify trunking on Cisco switches
    • DTP
    • Auto negotiation
  • Configure and verify PVSTP operation
    • describe root bridge election
    • spanning tree mode

IP addressing (IPv4 / IPv6)

  • Describe the operation and necessity of using private and public IP addresses for IPv4 addressing
  • Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment.
  • Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment.
  • Describe the technological requirements for running IPv6 in conjunction with IPv4 such as dual stack
  • Describe IPv6 addresses
    • Global unicast
    • Multicast
    • Link local
    • Unique local
    • eui 64
    • autoconfiguration

IP Routing Technologies

  • Describe basic routing concepts
    • CEF
    • Packet forwarding
    • Router lookup process
  • Describe the boot process of Cisco IOS routers
    • POST
    • Router bootup process
  • Configure and verify utilizing the CLI to set basic Router configuration
    • Cisco IOS commands to perform basic router setup
  • Configure and verify operation status of a device interface, both serial and ethernet
  • Verify router configuration and network connectivity
    • Cisco IOS commands to review basic router information and network connectivity
  • Configure and verify routing configuration for a static or default route given specific routing requirements
  • Manage Cisco IOS Files
    • Boot preferences
    • Cisco IOS image(s)
    • Licensing
      • Show license
      • Change license
  • Differentiate methods of routing and routing protocols
    • Static vs. Dynamic
    • Link state vs. Distance Vector
    • Administrative distance
    • split horizon
    • metric
    • next hop
    • ip routing table
    • Passive Interfaces
  • Configure and verify OSPF (single area)
    • Benefit of single area
    • neighbor adjacencies
    • OSPF states
    • Discuss Multi area
    • Configure OSPF v2
    • Configure OSPF v3
    • Router ID
    • Passive interface
    • LSA types
  • Configure and verify EIGRP (single AS)
    • Feasible Distance / Feasible Successors /Administrative distance
    • Feasibility condition
    • Metric composition
    • Router ID
    • Auto summary
    • Path selection
    • Load balancing
      • Equal
      • Unequal
    • Passive interface
  • Configure and verify interVLAN routing (Router on a stick)
    • sub interfaces
    • upstream routing
    • encapsulation
  • Configure SVI interfaces

IP Services

  • Configure and verify DHCP (IOS Router)
    • configuring router interfaces to use DHCP
    • DHCP options
    • excluded addresses
    • lease time
  • Describe the types, features, and applications of ACLs
    • Standard
      • Sequence numbers
      • Editing
    • Extended
    • Named
    • Numbered
    • Log option
  • Configure and verify ACLs in a network environment
    • Named
    • Numbered
    • Log option
  • Identify the basic operation of NAT
    • Purpose
    • Pool
    • Static
    • 1 to 1
    • Overloading
    • Source addressing
    • One way NAT
  • Configure and verify NAT for given network requirements
  • Configure and verify NTP as a client
  • Recognize High availability (FHRP)
    • VRRP
    • HSRP
    • GLBP
  • Configure and verify Syslog
    • Utilize Syslog Output
  • Describe SNMP v2 & v3

Network Device Security

  • Configure and verify network device security features such as
    • Device password security
    • Enable secret vs enable
    • Transport
    • Disable telnet
    • SSH
    • VTYs
    • Physical security
    • Service password
    • Describe external authentication methods
  • Configure and verify Switch Port Security features such as
    • Sticky MAC
    • MAC address limitation
    • Static / dynamic
    • Violation modes
      • Err disable
      • Shutdown
    • Protect restrict
    • Shutdown unused ports
    • Err disable recovery
    • Assign unused ports to an unused VLAN
    • Setting native VLAN to other than VLAN 1
  • Configure and verify ACLs to filter network traffic
  • Configure and verify an ACLs to limit telnet and SSH access to the router

Troubleshooting

  • Identify and correct common network problems
  • Utilize netflow data
  • Troubleshoot and correct common problems associated with IP addressing and host configurations.
  • Troubleshootand Resolve VLAN problems
    • identify that VLANs are configured
    • port membership correct
    • IP address configured
  • Troubleshoot and Resolve trunking problems on Cisco switches
    • correct trunk states
    • correct encapsulation configured
    • correct vlans allowed
  • Troubleshoot and Resolve Spanning Tree operation issues
    • root switch
    • priority
    • mode is correct
    • port states
  • Troubleshoot and Resolve routing issues
    • routing is enabled
    • routing table is correct
    • correct path selection
  • Troubleshoot and Resolve OSPF problems
    • neighbor adjancies
    • Hello and Dead timers
    • OSPF area
    • Interface MTU
    • Network types
    • Neighbor states
    • OSPF topology database
  • Troubleshoot and Resolve EIGRP problems
    • neighbor adjancies
    • AS number
    • Load balancing
    • Split horizon
  • Troubleshoot and Resolve interVLAN routing problems
    • Connectivity
    • Encapsulation
    • Subnet
    • Native VLAN
    • Port mode trunk status
  • Troubleshoot and Resolve ACL issues
    • Statistics
    • Permitted networks
    • Direction
      • Interface
  • Troubleshoot and Resolve WAN implementation issues
    • Serial interfaces
    • PPP
    • Frame relay
  • Troubleshoot and Resolve Layer 1 problems
    • Framing
    • CRC
    • Runts
    • Giants
    • Dropped packets
    • Late collision
    • Input / Output errors
  • Monitor NetFlow statistics
  • Troubleshoot etherchannel problems

WAN Technologies

  • Identify different WAN Technologies
    • Metro Ethernet
    • VSAT
    • Cellular 3G / 4G
    • MPLS
    • T1 / E1
    • ISDN
    • DSL
    • Frame relay
    • Cable
    • VPN
  • Configure and verify a basic WAN serial connection
  • Configure and verify a PPP connection between Cisco routers
  • Configure and verify Frame Relay on Cisco routers
  • Implement and troubleshoot PPPoE
زمانبندی دوره های Cisco
نام دوره تعداد ساعات زمان برگزاری ساعات برگزاری تاریخ شروع شهریه (ریال) دوره شهریه دوره با تخفیف
CCNA 50 یکشنبه-سه شنبه 17:00-20:00 93/10/07 6600000 2640000(%60 تخفیف ویژه)
CCNA 50 ‌شنبه-دوشنبه-چهارشنبه 09:00-15:00 93/10/08 6600000 2640000(%60 تخفیف ویژه)
CCNA Security 40 پنجشنبه 14:00-20:00 93/10/25 5300000 3700000
CCNA 50 جمعه 09:00-15:00 93/11/17 6600000 4600000
MikroTik-MTCNA 40 ‌شنبه-دوشنبه-چهارشنبه 09:00-15:00 93/10/29 6600000 2640000(%60 تخفیف ویژه)
CCNP 120 جمعه 9:00-15:00 93/09/14 17300000 12000000
دوره های فشرده
CCNA 40 دوشنبه تا پنجشنبه 9:00-19:00 93/12/25 6600000 4600000

شرايط ثبت نام :


1- لطفا جهت پيش ثبت نام دوره مورد نظر فرم زير را تکميل و ارسال نماييد حداکثر ظرف مدت 48 ساعت پس از ارسال فرم مشاورين نورا جهت پيگيري ثبت نام با شما تماس حاصل مي نمايند.  

2-ثبت نام قطعي به صورت حضوري و يا با واريز 50% شهريه دوره به حساب موسسه امکان پذير مي باشد.

3- اشراف کامل دانشجو به مطالب پيش نياز دوره  الزامي مي باشد.

4- جهت تکميل مراحل ثبت نام ارائه کپي کارت ملي الزامي مي باشد.

5- دانشجو موظف است حداقل 4 روز قبل از شروع دوره انصراف خود را به واحد آموزش اعلام نماید به انصرافاتی که بعد از مدت تعیین شده اعلام گردند ترتیب اثر نخواهد شد و وجه پرداخت شده مسترد نمی گردد.

6- لطفا مبلغ پرداختی را به شماره حساب 1410312488 جام بانک ملت به نام شرکت نورا ایمن سیستم واریز نموده وحتما در هنگام واریز وجه نام و نام خانوادگی خود را در قسمت پرداخت کننده فیش بانکی وارد نمایید.

(*)
(*)
(*)
(*)
(*)
(*)
من با شرایط و ضوابط ثبت نام موافقم

  • تلفن: 88175560 -021
  • فکس:88175534 -021
  • ایمیل: info [at] noora.ir
ثبت نام

بر اساس ماده 23 قانون حمایت حقوق مولفان، کلیه آثار ارائه شده در سایت با مجوز از صاحب امتیاز اثر می باشد کلیه حقوق سایت برای مؤسسه نورا نت (NooraNet) محفوظ بوده و هر گونه برداشت غیرمجاز پیگرد قانونی دارد